Cell Phone Signal Booster with 1000-1500 sq.m Coverage Area AZB030

Feature

• GSM & DCS Dual Band signal booster
• High system gains with 1000-1500 sq.m coverage area
• Full duplex and double end design
• ALC technology with auto-steady function adopted
• With amplified linear power, the intermodulation and spuriousness are suppressed effectively
• External power supply
• Convenient installation

Specification

• Primary function: Mobile Signal Booster
• Network format: GSM & DCS Dual Band
• Frequency Range
  - Uplink: GSM 890-915MHz / DCS 1710-1785MHz
  - Downlink: GSM 935-960 MHz / DCS 1805-1880MHz
• Gain
  - Uplink-Gp greater than or equal to 65dB / Downlink-Gp greater than or equal to 70dB
  - Uplink-Gp greater than or equal to 55dB / Downlink-Gp greater than or equal to 60dB
• Coverage areas: 1000-1500 square meters (depends on different terrain, blocks and spaces)
• Output power
  - Uplink: 17dBm
  - Downlink: 20dBm
• Pass band ripple: Smaller than or equal to 20dB
• Guard band rejection
  - (BW-60dB) smaller than or equal to 104MHz
  - (BW-70dB) smaller than or equal to 107MHz
• Gain Adjustable Range: MGC more than or equal to 30dB
• Output Power: More than or equal to 10 dBm
• Pass Band Ripple
  - GSM: 4dB
  - DCS: 15dB
• Guard Band Rejection
  - GSM: (BW-60dB) less than or equal to 42MHz, (BW-70dB) less than or equal to 45MHz
  - DCS: (BW-60dB) less than or equal to 104MHz, (BW-70dB) less than or equal to 107MHz
• I/O Impedance: 50 Ohm/N connector
• I/O Return Loss: Smaller than or equal to -10dB
• Noise Figure: Smaller than or equal to -8dB
• Intermodulation Attenuation (Po=13dBm): More than or equal to 40dBc
• Transmission Delay: Smaller than or equal to 0.5 micro seconds
• Ambient Temperature: 10 degrees Celsius under zero to 50 degrees Celsius
• Power Supply: AC110-220V plus or minus 10 percent, 45-55Hz
• Reliability: To the GB6993-86 standard
• Electromagnetic compatibility: To the ETS300 694-4 standard
• Material: Aluminum alloy heat dissipation case